Назва: Запчастина для посудомийки Whirlpool 481240448753
Недоступно до замовл.
Номер на схемі: 9935
Артикул:482253280216
Назва: Воронка Whirlpool 482253280216
Недоступно до замовл.
Характеристики:
Water pressure: Inlet pressure
0.3 bar - 10 bar
Rotations: Drain pump motor
3000 RPM
Detergent capacity: Rinse aid dosage
135 cm 3
Electronic boards: Serial boards (Data set)
493105
Regeneration with automatic salt adaption: after wash cycles
Depending on the water hardness
Dimensions + Weight: Wooden door for Integrable types (Weight)
max. 5.5 kg
Flow rates/ Inlet volume: Shower/Spray arm top
~ 8 l/min
Spray pump motor permant spray system: Voltage
220/ 240 V
Heating element: Temperature on surface
~ 115 °C
Flow rates/ Inlet volume: Fan for drying
Total 900 l/min
Primary air flow 210 l/min
Secondary air flow 780 l/min
Detergent capacity: Prewash
10 cm 3
Drain pump motor: Power Consumption
30 W
Coil of dispenser: Resistance
1.3 k Ω
Flow rates/ Inlet volume: Spray pump
45 l/min - 65 l/min
Program information:
All programs will be locked after start. Changing the program or ?nishing the program will be possible only after pressing the start button for longer then 1.5 sec. (Break by customer)
A switching off the appliance or unplug the appliance for a while, this will frozen the program step and later on, the program continuos on the same position.
Exception: Switching off the appliance or unplug the appliance during the drying phase, this will lead directly to the end of the program.
Електричні базові дані: напруга
220/ 230 V
Heating element: Safety thermostat self reset (Temperature of water)
~ 85 °C
Rotations: Spray pump motor
2800 RPM
Heating element:
1 Element system
Electronic boards: Serial boards (Basic UCB, not programmed)
4619 724 84451
Single electric water inlet valve: Resistance
3.76 k Ω
Data Energy Label: Drying Performance
A
Single electric water inlet valve: Voltage
220/ 240 V
Heating element: Power Consumption
1.87/ 2.04 kW
Regeneration valve: Frequency
50/ 60 Hz
Rotations: Spray arm upper
30 RPM - 40 RPM
Regeneration with automatic salt adaption: Volume
300 cm 3
Flow rates/ Inlet volume: Pump height max.
1.1 m
Flow rates/ Inlet volume: Spray arm lower
~ 33 l/min
Dimensions + Weight: Wooden door for Integrable types (Width)
592 mm - 595 mm
Spray pump motor permant spray system: HI
69 Ω
Dimensions + Weight: Wooden door for Integrable types (Max. stick out over lower edge of appliance door)
92 mm
Water softener: Resin container
700 cm 3
Heating element: Voltage
220/ 230 V
Flow rates/ Inlet volume: Inlet valve
4 l/min
Accessory:
If you need spare parts apart from the spare part list have a look
in the Service Bulletin 4812 718 40084.
Fan for drying: Resistance
141 Ω
Water softener: Salt container
2 kg
Options:
Delay function
Electronic boards: Serial boards (CB programmed)
493115
Dimensions + Weight: Wooden door for Integrable types (Height of plinth)
min. 93 mm
Drain pump motor: Voltage
220/ 240 V
Detergent capacity: Dosage steps
1 ml - 6 ml
Electrical base data: Total power
2.0 kW - 2.2 kW
Regeneration with automatic salt adaption: Salt consumption for regeneration
77 g
Coil of dispenser: Frequency
50/ 60 Hz
Dimensions + Weight: Product dimensions (Weight)
50 kg
Dimensions + Weight: Wooden door for Integrable types (Height)
515 mm - 600 mm
Optical water indicator (OWI): Combination part of
Regeneration 0.3 l 15 mm
Back rinse 3x 1.0 l 60 mm
Prewash 4.8 l 120 mm
Main wash 4.2 l 118 mm
Intermediate rinse 1 4.2 l 118 mm
Intermediate rinse 2 4.2 l 118 mm
Clear rinse 4.2 l 118 mm
Safety/ overflow 8.5 l 141 mm
Heating element: Fuse
206 °C
Regeneration valve: Resistance
3.13 k Ω
Electronic boards: Serial boards ()
Programing of version and programmed control board, see "Service" and "Data set" on rating plate of inner door:
Regeneration with automatic salt adaption: Water hardness
0 - 60 °dh 0 - 10.7 mmol/l 0 - 107 °Fh
Data Energy Label: Energy Performance
A
Flow rates/ Inlet volume: Flow meter
208 lmp/l
Data Energy Label: Reference program
P5f
Розміри + Вага: Розміри продукту (ширина)
59.7 cm
Drain pump motor: Resistance
146 Ω
Succession of programs: Programs ()
see program diagram
Dimensions + Weight: Wooden door for Integrable types (Thickness)
16 mm - 20 mm
Електричні базові дані: частота
50 Hz
Coil of dispenser: Voltage
220/ 240 V
NTC
20 °C 58.1 kΩ
25 °C 47.1 kΩ
30 °C 38.2 kΩ
40 °C 25.4 kΩ
50 °C 17.2 kΩ
60 °C 11.8 kΩ
70 °C 8.3 kΩ
80 °C 6 kΩ
85 °C 4 kΩ
Електрична база даних: Запобіжник
10 A
Water pressure: Spray pump pressure
0.3 bar
Fan for drying: Voltage
220 V - 240 V
Розміри + Вага: Розміри продукту (Глибина)
55.5 cm
Regeneration valve: Voltage
220/ 240 V
Rotations: Fan for drying
2500 RPM
Detergent capacity: Main wash
40 cm 3
Regeneration with automatic salt adaption: Number of cycles with 2 kg salt
26
Water softener: Regeneration dosage
300 cm 3
Heating element: Resistance
24.5 Ω
Single electric water inlet valve: Frequency
50/ 60 Hz
Spray pump motor permant spray system: HA
48 Ω
Spray pump motor permant spray system: Power Consumption