Назва: Запчастина для посудомийки Whirlpool 481240448753
Недоступно до замовл.
Номер на схемі: 9935
Артикул:482253280216
Назва: Воронка Whirlpool 482253280216
Недоступно до замовл.
Характеристики:
Single electric water inlet valve: Waterstop system
Mechanical Waterstop
Detergent capacity: Rinse aid dosage
135 cm³
Dimensions + Weight: Wooden door (Height)
515 - 600 mm
Electronic boards: Serial boards (Data set)
770981
Spray arm: Flow rate (Spray arm upper)
~ 27 l/min
Electronic boards: Serial boards (UCB programmed)
Eingabe Electr.
770991
Heating element: Type
Einkreissystem
Spray arm: Flow rate (Shower/Spray arm top)
~ 8 l/min
Motor: HI
62 Ω
Heating element: Temperature on surface
~ 115 °C
Alarms: Refill rinse aid (rinse aid control)
Reed contact
Detergent capacity: Prewash
10 cm³
Drain pump motor: Power Consumption
30 W
Coil of dispenser: Resistance
1.3 k Ω
Program information:
Alle Programme werden nach dem Programmstart verriegelt. Zum Ändern oder Beenden des gewählten Programms Startknopf länger als 1,5 s drücken.
Bei Programmunterbrechungen läuft das Programm von der Stopposition an weiter.
Motor: Capacitor
4 µF
Електричні базові дані: напруга
220 - 230 V / 50 Hz
Heating element: Safety thermostat self reset (Temperature of water)
85 °C
Programs: Succession of programs
siehe Schließschema
P1a - P3a - P5j - P7a - P13a
Single electric water inlet valve: Resistance
3.76 k Ω
Single electric water inlet valve: Voltage
220/ 240 V
Heating element: Power Consumption
1.87/ 2.04 kW
Regeneration valve: Frequency
50/ 60 Hz
Alarms: Refill salt (salt control)
Reed contact
Electronic boards: Serial boards (Basic control board, not programmed)
see on the boards itself 4619 727 50951
Motor: Voltage
220 - 240 V / 50 Hz
Water softener: Resin container
700 cm³
Heating element: Voltage
220 - 230 V / 50Hz
Valve Wärmetauscher: Frequency
50/ 60 Hz
Water softener: Salt container
2 kg
Spray arm: Rotations (Spray arm upper)
30 - 40 RPM
Dimensions + Weight: Wooden door (Max. stick out over lower edge of appliance door)
92 mm
Motor: Type
CRIN
Regeneration: Volume
300 cm³
Drain pump motor: Voltage
220 - 240 V / 50 Hz
Detergent capacity: Dosage steps
1 - 6 ml
Electrical base data: Total power
2.2 kW
Motor: Rotations
2800 RPM
Coil of dispenser: Frequency
50/ 60 Hz
Regeneration: after wash cycles
Depending on the water hardness
Dimensions + Weight: Product dimensions (Weight)
50 kg
Programs:
Permanent washing system
Single electric water inlet valve: Inlet pressure
0.3 - 10 bar
Heating element: Fuse
206 °C
Regeneration valve: Resistance
3.13 kΩ
Valve Wärmetauscher: Voltage
220/ 240 V
Water Level im Normalprogramm: Measuring the level ()
Grobfilter entnehmen, stattdessen Meterstab auf tiefsten Punkt einstellen, Wasserhöhe ablesen!
Motor: Power Consumption
130 W
Model
BI IC 5A
Розміри + Вага: Розміри продукту (ширина)
59.7 cm
Drain pump motor: Resistance
146 Ω
Motor: HA
74.8 Ω
Coil of dispenser: Voltage
220/ 240 V
Regeneration: Salt consumption for regeneration
~ 77 g
Dimensions + Weight: Wooden door (Height of plinth)
min. 93 mm
Електрична база даних: Запобіжник
10 A
Valve Wärmetauscher: Resistance
4.0 - 4.2 kΩ
Electronic boards: Serial boards (Display board)
4619 724 89912
Розміри + Вага: Розміри продукту (Глибина)
55.5 cm
Dimensions + Weight: Wooden door (Width)
592 - 595 mm
Regeneration valve: Voltage
220/ 240 V
Motor: Pump pressure
0.2 - 0.4 bar
Dimensions + Weight: Wooden door (Weight)
max. 5.5 kg
Detergent capacity: Main wash
40 cm³
Water softener: Regeneration dosage
300 cm³
Valve Wärmetauscher: Power Consumption
7 W
Motor: Pump height max.
1.1 m
Heating element: Heating resistances
(T=20°C)
24,5 Ω
Single electric water inlet valve: Frequency
50/ 60 Hz
Dimensions + Weight: Wooden door (Thickness)
16 - 20 mm
Spray arm: Rotations (Spray arm lower)
30 - 40 RPM
Heating element: Heating speed
~ 2,0 °C/min
Electronic boards: Serial boards (For programing please use Service Assistance Module (S.A.M.))