Назва: Фітінг для електропосудомийної машини Whirlpool 481246279738
Недоступно до замовл.
Номер на схемі: 9042
Артикул:481290508246
Назва: Фітінг для посудомийки Whirlpool 481290508246
Недоступно до замовл.
Номер на схемі: 9104
Артикул:481290508237
Назва: Гвинт для посудомийної машини Whirlpool 481290508237
Недоступно до замовл.
Номер на схемі: 9935
Артикул:481990500033
Назва: Воронка для посудомийки Whirlpool 481990500033
Недоступно до замовл.
Характеристики:
Water pressure: Inlet pressure
0.5 bar - 9 bar
Rotations: Drain pump motor
2500 RPM
Dimensions + Weight: Wooden door (Height)
650 mm - 720 mm
Regeneration dosage: Salt container
1.5 kg
Spray pump motor: Voltage
220/ 240 V
Volume: Clear rinse
140 ccm
Heating element: Temperature on surface
~ 115 °C
Volume: Water connection up to
60 °C
Data Energy Label: Reference program (Bio eco)
55°
Volume: Rinse aid dosage
140 cm 3
Succession of programs: Succession (Bio eco)
55°
Spray pump motor: HA
~ 54 Ω
Drain pump motor: Power Consumption
38 W
Electrical base data: Voltage 220/230 V (min.)
220 V
Coil of dispenser: Resistance
~ 1.2 k Ω
Measuring the level:
Remove the coases sieve, put into the sump a meassuring meter, look the height of the water level
Electronic boards: Service boards ()
siehe Ersatzteilliste
Program information:
End - Acoustic signal
All programs will be locked after start. Changing the program or ?nishing the program will be possible only after pressing the start button for longer then 1.5 sec. (Break by customer)
A switching off the appliance or unplug the appliance for a while, this will frozen the program step and later on, the program continuos on the same position.
Exception: Switching off the appliance or unplug the appliance during the drying phase, this will lead directly to the end of the program.
Heating element: Safety thermostat self reset (Temperature of water)
~ 85 °C
Safety level:
(Floater switches of the inlet valve and on the drain pump)
Rotations: Spray pump motor
2850 ± 20RPM
Heating element:
1 Element flow through system
Measuring the level: Working level
110 mm
Single electric water inlet valve: Resistance
3.76 k Ω
Drain pump motor: Frequency
50 Hz
Single electric water inlet valve: Voltage
220/ 240 V
Heating element: Power Consumption
2.05 kW
Regeneration dosage: Steps
5
to set the water softening system
Heating element: Voltage
220/ 230 V
Measuring the level: Safety level
125 mm
Regeneration valve: Power Consumption
6 W
Spray pump motor: HI
~ 45 Ω
Spray pump motor: Capacitor
6 µ F
Regeneration dosage: Volume for regeneration
320 cm 3
320
Dimensions + Weight: Wooden door (Max. stick out over lower edge of appliance door)
90 mm
Dimensions + Weight: Product dimensions ()
Full Door appliances
Drain pump motor: Voltage
220/ 240 V
Measuring the level: Safety/ overflow
125 mm
Heating element: Double Safety thermostat
85 °C
Dimensions + Weight: Wooden door for Full Door appliances (Width)
442 mm - 448 mm
Double electric water inlet valve ELTEK: Voltage 220/ 240 V (min.)
220 V
Coil of dispenser: Frequency
50/ 60 Hz
Volume: Detergent
5+25 gr
Thermostat NTC
23 °C ~ 14 k Ω
Dimensions + Weight: Product dimensions (Weight)
43 kg
Dimensions + Weight: Wooden door for Full Door appliances (Height of plinth)
min. 93 mm
Heating element: Fuse
206 °C
Dimensions + Weight: Wooden door for Full Door appliances (Max. stick out over lower edge of appliance door)
90 mm
Regeneration valve: Resistance
~ 3.75 k Ω
Double electric water inlet valve ELTEK: Voltage 220/ 240 V (max.)
240 V
Dimensions + Weight: Wooden door for Full Door appliances (Height)
650 mm - 720 mm
Розміри + Вага: Розміри продукту (ширина)
44.8 cm
Drain pump motor: Resistance
~ 146 Ω
Succession of programs: Programs ()
see program diagram
Electrical base data: Voltage 220/230 V (max.)
230 V
Coil of dispenser: Voltage
220/ 240 V
NTC
23 °C ~ 14 kΩ
Succession of programs: Succession (Delicate)
45°C
Water pressure: Spray pump pressure
~ 0.3 bar
Розміри + Вага: Розміри продукту (Глибина)
57.0 cm
Regeneration dosage: Number of cycles with 1.5 kg salt
20
20
Volume: Rinse aid dispenser
per step
1 ccm
Dimensions + Weight: Wooden door (Width)
445 mm - 450 mm
Regeneration valve: Voltage
220 V - 240 V
Heating element: Thermal fuse
206 °C
Dimensions + Weight: Wooden door (Weight)
2,5 kg - 6,2 kg
Succession of programs: Succession (Normal)
65°
Heating element: Resistance
24.5 Ω
Regeneration dosage: Default water hardness
3
Dimensions + Weight: Wooden door for Full Door appliances (Weight)
2.5 kg - 6.2 kg
Single electric water inlet valve: Frequency
50/ 60 Hz
Dimensions + Weight: Wooden door (Thickness)
16 mm - 25 mm
Spray pump motor: Power Consumption
150 W
Heating element: Heating speed
~ 2.0 °C/min
Volume: Capacity
9 stand. place settings
Succession of programs: Succession (Intensive)
70°C
Dimensions + Weight: Wooden door for Full Door appliances (Thickness)
16 mm - 20 mm
Regeneration dosage: Position of selector setting German degrees °dH French degrees °fH
Setting N.1 NO SALT 0 - 4 0 - 7
Setting N. 1 5 - 9 8 - 15
Setting N. 2 10 - 17 16 - 30
Setting N. 3 18 - 26 31 - 45
Setting N. 4 27 - 35 46 - 60
Setting N. 5 36 - 47 61 - 80
0 - 4 0 - 7 Position 1
5 - 9 8 - 15 Position 2
10 - 17 16 - 30 Position 3
18 - 26 31 - 45 Position 4
27 - 35 46 - 60 Position 5
36 - 47 61 - 80