Название: Воронка для электропосудомоечной машины Whirlpool 481990500033
Недоступно к заказу
Характеристики:
Water pressure: Inlet pressure
0.5 bar - 9 bar
Regeneration dosage: Steps to set the water softening system
5
Rotations: Drain pump motor
2500 RPM
Regeneration dosage: Salt container
1.5 kg
Coil of dispenser: Voltage 220/ 240 V (max.)
240 V ± 10 %
Volume: Clear rinse
140 ccm
Heating element: Temperature on surface
~ 115 °C
Push buttons: Power Consumption
16 (4) W
Volume: Water connection up to
60 °C
Data Energy Label: Reference program (Bio eco)
55°
Succession of programs: Succession (Bio eco)
55°C
55°
Spray pump motor: Resistance (Primary winding)
~ 44 ± 7 %
Measuring the level:
Remove the coases sieve, put into the sump
a meassuring meter, look the height of the water level
Program information:
All programs will be locked after start. Changing the program or ?nishing the program will be possible only after pressing the start button for longer then 1.5 sec. (Break by customer)
A switching off the appliance or unplug the appliance for a while, this will frozen the program step and later on, the program continuos on the same position.
Exception: Switching off the appliance or unplug the appliance during the drying phase, this will lead directly to the end of the program.
Spray pump motor: Voltage 220/ 240 V (max.)
240 V ± 10 %
Электрические базовые данные: напряжение
220 V - 230 V
Heating element: Safety thermostat self reset (Temperature of water)
~ 85 °C
Safety level:
(Floater switches of the inlet valve and on the drain pump)
Rotations: Spray pump motor
2850 ± 20RPM
Heating element:
1 Element flow through system
Measuring the level: Working level
110 mm
Single electric water inlet valve: Resistance
3.76 k Ω
Single electric water inlet valve: Voltage
220/ 240 V
Heating element: Power Consumption
2.05 kW
Flow rates/ Inlet volume
20 l/min
Spray pump motor: Voltage 220/ 240 V (min.)
220 %
Heating element: Voltage
220/ 230 V
Measuring the level: Safety level
125 mm
Drain pump motor: Voltage 220/ 240 V (max.)
240 V ± 10 %
Inlet valve aquastop: Resistance
~ 4,12 k Ω
Regeneration valve: Power Consumption
6 W
Suppressor: Capacitor
1 x 0.1 µ F (X1) + 2 x 2700 pF (Y)
Regeneration dosage: Volume for regeneration
320 cm 3
320
Inlet valve aquastop: Flow rates/ Inlet volume
3,5 l/min ± 7 %
Drain pump motor: Voltage 220/ 240 V (min.)
220 %
Electrical base data: Total power
2.2 kW
Heating element: Double Safety thermostat
98 °C ± 5 °C
Volume: Detergent
5+25 gr
Volume: Adjustable
1 - 6
Coil of dispenser: Voltage 220/ 240 V (min.)
220 %
Thermostat NTC
25 °C ~ 11,5 k Ω 30 °C ~ 9,5 k Ω
Dimensions + Weight: Product dimensions (Weight)
56 kg
Micro switch safty device: Voltage
250 V
Heating element: Fuse
206 °C
Regeneration valve: Resistance
~ 3.75 k Ω
Succession of programs: Succession (Rapid)
45°
Suppressor: Resistance
2.2 M Ω
Размеры + Вес: Размеры продукта (ширина)
44.8 cm
Succession of programs: Programs ()
see program diagram
Spray pump motor: Resistance (Start winding)
~ 50,5 ± 7 %
Электрические базовые данные: частота
50 Hz
Электрические базовые данные: Потребляемая мощность
2,2 W
NTC
23 °C ~ 14 kΩ
Succession of programs: Succession (Delicate)
45°C
45°
Электрическая база данных: Предохранитель
10 A
Water pressure: Spray pump pressure
~ 0.3 bar
Inlet valve aquastop: Frequency
50/ 60 Hz
Размеры + Вес: Размеры продукта (Глубина)
57.0 cm
Regeneration dosage: Number of cycles with 1.5 kg salt
20
Volume: Rinse aid dispenser
1 3 - 4 cm 3
per step
1 ccm
Indication lights: Voltage
230 V
Regeneration valve: Voltage
220 V - 240 V
Heating element: Thermal fuse
206 °C ± 10 °C
Succession of programs: Succession (Normal)
65°
65°
Heating element: Resistance
24.5 Ω
Push buttons: Voltage
250 V
Regeneration dosage: Default water hardness
3
Indication lights: Power Consumption
0,5 W
Single electric water inlet valve: Frequency
50/ 60 Hz
Heating element: Heating speed
~ 2.0 °C/min
Inlet valve aquastop: Inlet pressure
0,5 bar - 10 bar
Volume: Capacity
9 stand. place settings
Inlet valve aquastop: Voltage
220 % - 240 V ± 10 %
Succession of programs: Succession (Intensive)
65°
70°
Regeneration dosage: Position of selector setting German degrees °dH French degrees °fH
Setting N.1 NO SALT 0 - 4 0 - 7
Setting N. 1 5 - 9 8 - 15
Setting N. 2 10 - 17 16 - 30
Setting N. 3 18 - 26 31 - 45
Setting N. 4 27 - 35 46 - 60
Setting N. 5 36 - 47 61 - 80
H0 < 9 < 15 keine
H1 < 15 < 25 alle 5 Zyklen
H2 < 23 < 40 alle 4 Zyklen
H3 < 34 < 60 alle 3 Zyklen
H4 < 46 < 80 alle 2 Zyklen
H5 < 58 < 100 jeden Zyklus