Название: Запчасть для электропосудомоечной машины Whirlpool 481240448753
Недоступно к заказу
Номер на схеме: 9935
Артикул:482253280216
Название: Воронка Whirlpool 482253280216
Недоступно к заказу
Характеристики:
Water pressure: Inlet pressure
0.3 bar - 10 bar
Electronic boards: Serial boards DB 4619 727 24641 ()
Programing of version and programmed control board, see "Service" and "Data set" on rating plate of inner door:
Rotations: Drain pump motor
3000 RPM
Detergent capacity: Rinse aid dosage
135 cm 3
Regeneration with automatic salt adaption: after wash cycles
Depending on the water hardness
Dimensions + Weight: Wooden door for Integrable types (Weight)
max. 5.5 kg
Flow rates/ Inlet volume: Shower/Spray arm top
~ 8 l/min
Heating element: Temperature on surface
~ 115 °C
Flow rates/ Inlet volume: Fan for drying
Total 900 l/min
Primary air flow 210 l/min
Secondary air flow 780 l/min
Detergent capacity: Prewash
10 cm 3
Drain pump motor: Power Consumption
30 W
Coil of dispenser: Resistance
1.3 k Ω
Flow rates/ Inlet volume: Spray pump
45 l/min - 65 l/min
Program information:
All programs will be locked after start. Changing the program or ?nishing the program will be possible only after pressing the start button for longer then 1.5 sec. (Break by customer)
A switching off the appliance or unplug the appliance for a while, this will frozen the program step and later on, the program continuos on the same position.
Exception: Switching off the appliance or unplug the appliance during the drying phase, this will lead directly to the end of the program.
Spray arms, turning rhythm at alternating spray system: Intermediate rinse
Spray arm lower ~2min
Upper arm ~2min
Электрические базовые данные: напряжение
220/ 240 V
Spray pump motor alternating spray system: Capacitor
4 µ F
Heating element: Safety thermostat self reset (Temperature of water)
~ 85 °C
Rotations: Spray pump motor
2800 RPM
Motor Diverter Valve: Signal (2x within ~13 sec.)
5.0
V
Heating element:
1 Element system
Electronic boards: Serial boards DB 4619 727 24641 (Basic UCB, not programmed)
4619 727 21531
Single electric water inlet valve: Resistance
3.76 k Ω
Data Energy Label: Drying Performance
A
Single electric water inlet valve: Voltage
220/ 240 V
Heating element: Power Consumption
1.87/ 2.04 kW
Regeneration valve: Frequency
50/ 60 Hz
Rotations: Spray arm upper
30 RPM - 40 RPM
Regeneration with automatic salt adaption: Volume
300 cm 3
Flow rates/ Inlet volume: Pump height max.
1.1 m
Flow rates/ Inlet volume: Spray arm lower
~ 33 l/min
Dimensions + Weight: Wooden door for Integrable types (Width)
592 mm - 595 mm
Dimensions + Weight: Wooden door for Integrable types (Max. stick out over lower edge of appliance door)
92 mm
Water softener: Resin container
700 cm 3
Motor Diverter Valve: Voltage
220 V - 240 V
Heating element: Voltage
220/ 240 V
Flow rates/ Inlet volume: Inlet valve
4 l/min
Accessory:
If you need spare parts apart from the spare part list have a look in the Service Bulletin 4812 718 40084.
For higher mounted Dishwashers to prevent the drain off effect - also usable for lower drain pipes and to
prevent the failure F8 use Kit 4812 310 18993.
Fan for drying: Resistance
141 Ω
Water softener: Salt container
2 kg
Options:
Zone washing
Dimensions + Weight: Wooden door for Integrable types (Height of plinth)
min. 93 mm
Drain pump motor: Voltage
220/ 240 V
Spray arms, turning rhythm at alternating spray system: Final rinse
Spray arm lower ~2min
Upper arm ~2min
Detergent capacity: Dosage steps
1 ml - 6 ml
Electrical base data: Total power
2.0 kW - 2.2 kW
Regeneration with automatic salt adaption: Salt consumption for regeneration
77 g
Coil of dispenser: Frequency
50/ 60 Hz
Spray pump motor alternating spray system: Power Consumption
125 W
Dimensions + Weight: Product dimensions (Weight)
50 kg
Dimensions + Weight: Wooden door for Integrable types (Height)
515 mm - 600 mm
Optical water indicator (OWI): Combination part of
Regeneration with automatic salt adaption: Water hardness
0 - 60 (53) °dh 0 - 10.7 mmol/l 0 - 107 °Fh
Data Energy Label: Energy Performance
A
Flow rates/ Inlet volume: Flow meter
208 lmp/l
Data Energy Label: Reference program
A12b
Размеры + Вес: Размеры продукта (ширина)
59.7 cm
Electronic boards: Serial boards DB 4619 727 24641 (UB)
4619 724 86781
Drain pump motor: Resistance
146 Ω
Electronic boards: Serial boards DB 4619 727 24641 (CB programmed)
732872
Succession of programs: Programs ()
see program diagram
Spray pump motor alternating spray system: HI
79 Ω
Dimensions + Weight: Wooden door for Integrable types (Thickness)
16 mm - 20 mm
Электрические базовые данные: частота
50 Hz
Spray arms, turning rhythm at alternating spray system: Prewash
Spray arm lower ~3min
Upper arm ~1min
Coil of dispenser: Voltage
220/ 240 V
NTC
20 °C 58.1 kΩ
25 °C 47.1 kΩ
30 °C 38.2 kΩ
40 °C 25.4 kΩ
50 °C 17.2 kΩ
60 °C 11.8 kΩ
70 °C 8.3 kΩ
80 °C 6 kΩ
85 °C 4 kΩ
Электрическая база данных: Предохранитель
10 A
Spray pump motor alternating spray system: Voltage
220/ 240 V
Water pressure: Spray pump pressure
0.4 bar
Fan for drying: Voltage
220 V - 240 V
Размеры + Вес: Размеры продукта (Глубина)
55.5 cm
Spray arms, turning rhythm at alternating spray system: Service Test program
Remark: When switching of the main switch or interrupt the mains during the Test Program runs, then the alternating of the spray arms change in the test program to the rhythm of main wash 5/3 min.
After finishing the test program (End LED shines and/or Start LED goes of) must the appliance be switched off.
Spray arm lower ~30sec
Upper arm ~30sec
Regeneration valve: Voltage
220/ 240 V
Rotations: Fan for drying
2500 RPM
Detergent capacity: Main wash
40 cm 3
Spray arms, turning rhythm at alternating spray system: Main wash
Spray arm lower ~3min
Upper arm ~5min
Regeneration with automatic salt adaption: Number of cycles with 2 kg salt
26
Water softener: Regeneration dosage
300 cm 3
Heating element: Resistance
24.5 Ω
Water Volume: Water Volume Level
Regeneration 0.3 l 15 mm
Back rinse 3x 1.0 l 60 mm
Prewash 3.9 l 120 mm
Main wash 3.2 l 118 mm
Intermediate rinse 1 3.2 l 118 mm
Intermediate rinse 2 3.2 l 118 mm
Clear rinse 3.2 l 118 mm
Safety/ overflow 8.5 l 141 mm
Single electric water inlet valve: Frequency
50/ 60 Hz
Heating element: Heating speed
~ 2.0 °C/min
Rotations: Spray arm lower
30 RPM - 40 RPM
Spray pump motor alternating spray system: HA
60 Ω
Electronic boards: Serial boards DB 4619 727 24641 (Data set)